Chapter 4: Hardware Installation Figure 4-3. Remove the Sliding Rail From the Sliding Track (Right Assembly Shown). 1. Pull the end of the sliding rail [1] until it is fully extended from the sliding track [2], engaging the locking button [3]. 2. Press the locking button [3] and continue to pull the sliding rail [1], removing it com- 3. Repeat Step 1 and Step 2 for the other rail assembly. pletely from the track. Attach the Sliding Rails to the Appliance Chassis Use the following procedure to attach the sliding rails to the appliance chassis. Figure 4-4. Attach the Sliding Rail to the Appliance Chassis (Right Assembly Shown). 20569-000 Rev. A EM2100 Installation Guide 23