Figure 4-4. Windows Internet Protocol Properties Dialog 4. In the TCP/IP properties dialog box, click the Use the following IP address: radio button and enter an appropriate IP address (for example, 1.2.3.5) and Subnet mask 255.255.255.0. 5. Click OK . 6. Close the Network Connections window. Step 3: Access SetNetGo Software The SetNetGo software lets you manage a variety of settings related to the AMR's connectivity. You can access SetNetGo from MobilePlanner (most common), or a secure web browser (for example, Chrome, Firefox, or Internet Explorer). To Access SetNetGo from MobilePlanner NOTE: Only start the following procedures if your computer is connected to the AMR via Ethernet cable.
1. Open the MobilePlanner software. 2. Enter 1.2.3.4 into the AMR address field, then click Connect . 3. Click the SetNetGo button (the large part of that icon, not the checkbox). 4. Click the SetNetGo tab. To Access SetNetGo via Web Browser 1. Start a web browser on your computer. 2. Enter the URL https://1.2.3.4 in the address bar of the web browser. 20569-020 Rev. A Fleet Operations Workspace Core User's Guide 39