Chapter 4: Fleet Operations Workspace Core Software Step 2: Set the IP Address on Your PC Manually set your PC’s Ethernet port IP address to 1.2.3.x, where x is any number 1 - 254, except 4 (which the AMR uses), and a Subnet mask of 255.255.255.0. No special DNS or gate- way settings are needed. NOTE: The AMR's maintenance Ethernet port is always enabled and per- manently set to IP address 1.2.3.4, with a Subnet mask of 255.255.255.0, for dir- ect, wired access to the on-board systems. 1. Open your PC's Network Connections window. 2. Right-click on your PC’s Local Area Connection Ethernet connection, and select Prop- erties . Figure 4-3. Windows Local Area Connection Properties Dialog 3.
In the Local Area Connection Properties dialog box, click on the TCP/IP protocol your network uses (for example, Internet Protocol Version 4 (TCP/IPv4)), then click Prop- erties. 38 Fleet Operations Workspace Core User's Guide 20569-020 Rev. A