SAMI G S 7 Control and Parameter Logic 7.1 Control Panel The control panel, situated on top of the Control Interface Card, incorporates a 2 by 20 character, alphanumeric LCD and a keypad. Main name Rotation direction --> forward reverse DRIVE 20 MAIN R1[ --> I ] The operational information, parameters, as well as fault indications are displayed in nine languages *) : English, Finnish, Swedish, Ger- man, Dutch, French, Danish, Spanish and Italian. The language selection is made in Start-Up Data Group parameter A LAN- GUAGE (refer to page 31). *) Factory setting is English.
Main number Control place [ ] Keypad External Run status I = Run 0 = Stop 7.2 Control Panel Operation Panel keys Selects the Setting mode and saves the selected parameter value. Parameter number and name Active reference R1=Ref 1 R2=Ref 2 Selects Operating Data as well as Main, Group and Parameter levels. In Setting mode, returns to the Display mode without changing the Param- eter value. 2 ACCELER TIME 1 [ 30 s ] R1[ --> I ] In Display mode selects the next/ previous Main, Group or Parameter. In Setting mode increases/de- creases parameter value.
Parameter value Mode indication [ ] Setting mode Display mode Changes the rotation direction in Keypad control (refer to parameter 11.8 on page 40). Figure 7-1. Control panel displays. Note that all the indications may not be visible at the same time. Starts and stops the motor in Keypad control. Resets faults, warnings and supervision indications. Note! To accelerate the rate of change of parameter value, keep the or button depressed continuously. 22