SAMI G S 35 MAIN GROUP PARAMETER DEFAULT CUSTOMER SETTING 20 Drive 27 Motor Control 1 Switching Freq 3 kHz 2 SAMI Max Out Volt 100%*U [V] N 3 Motor Power Rated 4 U/f Ratio Linear 5 Field Weak Point 50 Hz 6 IR-Compensation No 7 IR-Comp Voltage 0.01*U [V] 8 IR-Comp Range N 0 Hz 9 Slip Compensation 10 Nominal Slip Off 4 % 11 O/U Volt Control On 28 PFC-Control (Parameters available only if PFC-control macro has been selected) 1 PI-cont gain 250.0 % 2 PI-cont I-time 3 s 3 Reference step 1 0 % 4 Reference step 2 0 % 5 Reference step 3 0 % 6 Sleep delay 60 s 7 Sleep level 24 Hz 8 Wake-up level 35.0 % 9 Start freq 1 51.0 Hz 10 Start freq 2 51.0 Hz 11 Start freq 3 51.0 Hz 12 Low freq 1 25 Hz 13 Low freq 2 5 Hz 14 Low freq 3 25 Hz 15 Aux mot start DLY 5 s 16 Aux mot stop DLY 3 s 17 NBR of aux motos 1 18 Autochang interv.
72 h 19 Autochange level 45.0 % 20 Interlocks ON 21 Error value inv NO 22 Actual 1 input AI 2 23 Actual 2 input NO 24 Actual value sel ACT1 25 ACT1 min scale 100 % 26 ACT1 max scale 100 % 27 ACT2 min scale 100 % 28 ACT2 max scale 100 % 29 Regul Bypass CTRL NO 30 Display Unit bar 31 Display Unit Scale 1000 32 NBR of Decimals 2