SC-B9580 User's Guide Introduction L (Maintenance) The Maintenance menu is displayed on the screen, and you can perform maintenance such as cleaning parts and replacing consumables. M / (Switch connection status) The following icons indicate the connection status between the computer and the printer. Connection on : Connection off : The connection turns on or off every time this area is pressed. For example, you can finish work more efficiently by turning the connection off to prevent jobs from being received before performing maintenance such as printing a nozzle check pattern or executing Head Cleaning after cleaning around the print head.
Note that you may not be able to switch depending on the operating status of the printer. In this situation, the icon is grayed out indicating that the function is disabled. N (Switch screens) Switch between the Home screen (status display) and the Home screen (adjust while printing) every time this area is pressed. O (feed media to cutting position) Depending on the settings for the currently selected registered media, the end of the print may be on the plat‐ en after printing is complete. If you want to send the end of the print to the cutting position, you can press this area to feed the media to the cutting position.
Furthermore, if you perform an operation to feed the end of the print to the cutting position while it is in the cutting position, the print start position on the platen is fed to the cutting position. U “Cutting media” on page 43 Home screen (adjust while printing) The following section only describes parts that differ from the Home screen (status display). The current settings for each item are displayed on the adjust while printing screen. Press the display area to open the settings screen where you can adjust the settings. You can change the settings even while printing. See the following for more information on each item. U “Control Panel Menu” on page 75 20