SC-B9580 User's Guide Basic Operations Changing Settings During Printing Correcting Banding When you want to correct banding during printing, correct the media feed amount. You can change the settings for the adjustment items displayed on the home screen during printing. A During printing, press the following area on the adjust while printing screen. U “Understanding and Operating the Display” on page 16 The following example explains how to change the temperature setting for the heater, and how to correct the media feed amount when banding occurs in the printouts. Changing the Heater's Temperature (switch screens) on the Home screen.
If the adjust while printing screen is not displayed, press A Press the Temperature area on the adjust while printing screen. B Press / on the screen, or press the / buttons on the control panel to change the value. The screen for changing the temperature setting for the heater is displayed. If the feed amount is too small, black bands (dark stripes) appear; press the (or button) to adjust the feed amount upwards. You can also change this setting by pressing the Temperature area on the Status Indicator screen. In contrast, if the feed amount is too large, white bands (pale stripes) appear; press the (or button) to adjust the feed amount downwards. C Check the printing result.
If you are not satisfied with the results, use the / , or the / buttons on the control panel to change the value. The setting for the currently selected registered media number is updated. B Choose a value. Press / to change the temperature. D Press to return to the home screen. C Press to return to the home screen. Note: The results of changing the settings are un-done if you perform any of the following operations. Note: The time needed for the heaters to reach the specified temperatures varies with the ambient temperature. ❏ Restart Media Feed Adjustment . ❏ Execute Clear All Data and Settings . 50