1 Abstract Safety Precautions To ensure safe and reasonable use of this product, please use the product only after fully understanding the safety precautions described in this manual. Warning signs and their meanings The following markings are used in this manual to indicate that the place is important regarding safety. Failure to observe these precautions may result in personal injury or death, damage to this product and associated systems. And the listed points do not represent all safety matters to be observed, but only serve as a supplement to all safety precautions.
Danger It indicates an emergency and dangerous situation that is likely to result in death, serious injury and fire if not avoided. Warning Indicates a dangerous condition that could result in death, serious injury and fire if not avoided. Attention Indicates a dangerous condition that could lead to moderate or minor injuries and fire if not avoided. Notice Indicates a dangerous condition that could lead to equipment damage if not avoided. Safety Precautions Overall Precautions Danger For your safe use of the product, please be sure to read this manual. Keep this manual in a safe place so that it can be accessed by the person using the product at any time.
Do not remove the cover, cables, connectors, and optional equipment while the servo unit is powered on. Otherwise, it may cause electric shock, stop the operation of the product or burn out. Warning Please use the product under the power specifications (phase, voltage, frequency) that match the product. Otherwise, the product may be burnt, electric shock or fire. 1 SD700 Series Servo Technical Manual