Control panel bezel 1 Remove the control panel bezel by lifting up on both sides of the bezel edges until all the snaps are disengaged. Set the bezel aside. Figure 35. Removing the control panel bezel To reinstall 1 Align the new bezel at the lower notch. The bezel notch should align to the inside of the product Figure 36. Reinstalling the control panel bezel (1 of 2) 2 Press down until all the snaps are engaged, and then press outward until the bezel is secured. Figure 37. Reinstalling the control panel bezel (2 of 2) 124 Chapter 5 - Removal and replacement EN