Sunroof The panoramic roof consists of two glass parts. You can use the control buttons on the roof control panel to tilt / slide the front half and the rear half as the fixed part. The panoramic roof is equipped with a sun blind, which is located under the roof glass to provide protection in strong sunlight. Warning • Do not allow children to operate the panoramic roof, which may cause personal injury • Do not leave children alone in the car. Children may inadvertently operate switches or control buttons in the car, which may cause personal injury.
• Passengers are not allowed to extend any part of their body out of the skylight, otherwise flying debris, branches or other obstacles may cause serious injury. • Before closing the sunroof, please ensure that no part of the passengers (especially children) extends out of the sunroof, otherwise serious injury may be caused. Illustration: the panoramic sunroof button is located on the overhead control panel Warning • Remove snow, ice or sand from the roof glass before opening the sunroof, • Do not place heavy objects on the top of the sunroof.
• Please remove the sand, leaves and other foreign matters in the sliding rail of the sunroof in time to avoid jamming or failure to open and close normally during the sliding process of the sunroof. When the sun blind is fully closed, the sunroof needs to be fully closed. 1 Press the switch to open the sunroof glass and stop the ventilation position of the sunshade. Press the switch again to open the sunroof and the sunshade in linkage. If any sunroof switch is pressed during the opening process, the current action will be stopped. 2 Press the switch to close the sunroof glass. If any sunroof switch is pressed during the closing process, the current action will be stopped.
3 Press the switch to open the sunroof blind. If any sunroof blind switch is pressed during the opening process, the current action will be stopped. 4 Press the switch to close the sunroof blind. If any sunroof blind switch is pressed during the closing process, the current action will be stopped. Instruc tion