• Long press to close the sunroof blind, and release to pause 4 1 • Press briefly to fully open the sunroof blind. • Press and hold to open the sunroof blind, and release to pause 。 5 • The sunroof and sunroof blind can be opened to the ventilation position to ventilate the air in the vehicle. 2 3 This vehicle has the function of opening / closing the sunroof with the remote key. 4 If the panoramic sunroof or sunroof blind are suddenly blocked during closing, it will stop closing and move slightly in the opposite direction and stop. 5 6 If it is found that the wind noise is too loud after the sunroof is opened (depending on the driving speed), you can open one window slightly.
If the sunroof encounters an obstacle during the closing process, the anti pinch function will be triggered, and the sunroof or sunshade will move slightly in the opposite direction and stop. If it is unsuccessful to close again after removing the obstacle, press and hold the close button "" on the control panel, to force the sunroof to close. 。 7 Illustration ： Settings > Vehicle control （ Different configuration with different functions, please take the real vehicle as the standard ） 8 When the panoramic roof and sunroof blind cannot work normally, perform the initialization of panoramic sunroof according to the following steps: 9 1.
Start the vehicle, close the panoramic sunroof and sunroof blind, press and hold the panoramic sunroof button or sunroof blind button in the forward direction of the vehicle for more than 6s until the fully closed position stops (the button cannot be released at this time, otherwise initialization fails). After completion, initialization of the sunroof and sunroof blind are completed, The function can be confirmed by operating the sunroof button and the sunroof blind button 。 Long press (manual mode) and short press (automatic mode), short press time ≤ 250ms, long press time > 250ms.
10 1 • Press briefly to close the sunroof glass completely 11 • Long press to close the sunroof glass and release to pause. 2. Release the button. 2 3. Operate the sunroof button close gear again within 6S and keep it for 4S, the sunroof glass will tilt / slide open, and the sunroof blind will also move in the opening direction. After the sunroof glass is fully opened, the sunroof glass will start to close. After the sunroof glass is closed, the sunsroof blind will start to close. • Press briefly to fully open the sunroof glass and open the sun blind in linkage. • Press and hold, the sunroof will open, and the linkage between the glass and the sunshade will be suspended. 4.
Fully close, release the button, and the initialization of panoramic sunroof is completed. 3 • Press briefly to close the sunroof blind completely. Instr uctio n Instr uctio n