If the electric Backdoor encounters an obstacle when it is closed, the back door will trigger anti pinch and reverse 5 °, and give a buzzer alarm. After removing the obstacle, please operate each switch again to open and close the back door. 1. Open the electric backdoor and manually adjust the height to the required position. Warning 2. Press and hold the close button on the lower edge of the electric backdoor for about 5S, and the buzzer alarm sound will sound at the same time. The opening angle has been set. When opening or closing the electric backdoor, ensure that there is no one nearby.
When operating the electric backdoor, do not hinder the action of the electric backdoor in any way 1. Open the electric backdoor and manually adjust it to the maximum position angle. edge of the electric back door for about 5S, and the buzzer alarm sound will sound at the same time. The maximum opening angle has been set. 2. Press and hold the close button on the lower Warning When opening or closing the electric back door, please ensure that there is no one in the opening or closing path of the electric back door, otherwise personal injury may be caused. Do not use excessive force when opening or closing the electric back door manually.
Otherwise, the electric back door may be damaged or function abnormally. Attention If the vehicle battery is discharged or disconnected, be sure to manually turn it on and off once for initialization. ction