Skywell — SF5 product manual (EN)

Front hood 1 2 3 4 Picture: Front hood opening handle Picture: The front hood pressing position 5 Pull the opening handle at the lower part of the dashboard on the driver's side twice in a row, and the front hatch will automatically unlock and pop up to a certain height. You can manually lift the front hatch. The front hatch of the vehicle cannot be locked by its own weight, and pressure on the front edge or center of the vehicle will damage the front hatch. 6 Close the front hatch properly: 1. Lower the front hatch completely until it touches the latch.

Before opening or closing the front hatch, it is important to check that there are no obstacles (personnel and objects) around the front hatch, otherwise damage or serious injury may result. Warning 2. Place your hands in the area in front of the front cover as shown in the figure, and press down firmly with both hands to engage the front cover latch. 7 it is completely closed. 3. Gently lift the front edge of the front hatch and check to make sure Dangerous 8 Note Do not drive the vehicle when the front hatch is only secured by the spare latch.

9 Generally, after pulling the hood over the balance point, the hood can rise to the top by itself, but at low temperatures (-30 ℃ ~0 ℃ ), you need to push the hood until it is fully opened. At this time, the hood can be kept near the maximum opening position (5 Within °) does not fall. Prevent damage: • Do not close the front hatch with one hand, as this will concentrate the force in one area, which may cause dents or bends. Warning 10 • Do not press on the front edge of the front hatch, otherwise the edge may bend. • Do not close the front hatch forcibly or let it fall freely. 11