2. Make sure there are no metal objects on the surface of the wireless car charger, nor on the back of the compatible phone which meet the Qi standard. Move the phone close to the inductive sensor, and the wireless car charger's arms will open automatically then close automatically to clamp down the phone. The indicator light will be blue while charging normally. 3. In order to achieve optimum charging performance, make sure the phone is properly placed onto the wireless car charger, so it is close to the charging surface (refer to the figure below). When the indicator blinks, it indicates that the charger is in protection mode.
Please check whether there is a metal object on the charging surface or on the back of the phone. If the issue persists, please contact please contact the afer-sales service team. * * When a phone that does not support wireless charging is placed into the car charger, the indicator will blink.