Chapter 3: Installation 240.0 (9.5) 4.25 (0.17) A 124.0 (4.9) 10.0 (0.39) R4.0 (0.16) Detail A 260 (10.2) Units are mm (in.) Figure 3-1. Dimensions for Desk-top Mounting NOTE : Use 6-32 UNC screws, or screws of similar length and specifications, for mounting the processor to other equipment. The recommended screw length is 1/8 in. or 3.2 mm. Stack Mounting The SmartVision MX industrial PC can be stack-mount on top of a SmartController motion controller, using two mounting brackets available as an option with the industrial PC. Two views of one is shown in the following figure. Figure 3-2.
Side and Iso Views of SmartVision MX-SmartController Mounting Bracket The mounting brackets are strictly a mechanical attachment. No electrical connections are involved. SmartVision MX User’s Guide, 14362-000 Rev. B Page 12 of 30