Chapter 3: Installation Figure 3-4. DC Connector with Wires Note: Use connector supplied this end of cable User-supplied Power Supply (24 VDC, 6 A) SmartVision MX Optional Fuse - + Frame Ground + - Circuit protection Attach shield from user-supplied cable to SmartVision MX using left wire slot in 24 VDC connector Attach shield from user- supplied cable to frame ground on power supply User-supplied Shielded Power Cable Figure 3-5. Ground for 24 VDC Cable Connections SmartVision MX User’s Guide, 14362-000 Rev. B Page 16 of 30