Chapter 4: Connectors and Indicators Power/IO Side Input Output Audio RS232/485 RS232 VDC In Power Button LEDs Figure 4-2. SmartVision MX Power-side Connectors l Power button l Digital inputs up to 9 V tolerant l Digital outputs 100 mA max @ 24 VDC l Audio In and Audio Out ports These are not used by the software. l RS232/RS485 port l RS232 port l Power input 9 to 36 VDC, nominal 24 VDC @ 4.2 A l HDD LED l Power ON LED 4.1 Ethernet Ports Any of the Ethernet ports can be used to connect to Ethernet devices. Four of the ports provide Power over Ethernet, intended to provide the power needed for a GigE camera, though they can also be used as general-purpose Ethernet ports.
To attach the industrial PC to a network or broadband device, connect an Ethernet cable between the device and one of the Ethernet ports on the industrial PC. CAUTION: Do not connect the SmartVision MX directly to the internet. If the SmartVision MX is on a LAN that has Internet access, make sure there is a firewall between the LAN and the Internet in order to prevent unwanted and unauthorized network traffic from reaching the SmartVision MX. SmartVision MX User’s Guide, 14362-000 Rev. B Page 20 of 30