Chapter 1: Introduction 1.2 SmartVision MX User’s Guide, 14362-000 Rev. B Page 8 of 30 hat Doesn’t Come with a SmartVision MX? l 24 VDC power supply to power the SmartVision MX industrial PC (see External Power Supply on page 14). If you are using the SmartVision MX with a SmartController, you can generally use 24 VDC power from the SmartController to power the SmartVision MX. See Connecting to a SmartController on page 17. l Cameras and camera cables l Keyboard, mouse, and monitor These should be user-supplied, so you can run the ACE and ACE Sight applications, and well as control shutting down the industrial PC. l If power interruption is a concern, a UPS is recommended.
Contact Omron Adept Tech- nologies, Inc. for more information. w Can I Get Help? For details on getting assistance with your software or hardware, you can access the corporate website: http://www.ia.omron.com lated Manuals This manual covers the installation and startup of an SmartVision MX. The following manu- als provide information on safety, related products, advanced configurations and system spe- cifications. Table 1-1. Related Manuals Manual Title Description Robot Safety Guide Contains safety information for our robots. ACE User’s Guide Instruction for the use of the ACE software. ACE Sight User’s Guide Instruction for the use of the ACE Sight software.
SmartController EX User's Guide Contains information on the installation and operation of the optional SmartController EX and sDIO products.