MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF (EN)

Downloaded from https://www.everyspec.com lmaDBK-663(AT) The last key element uhich real tb software met contain ia a provision to trace process control data directly to the products manufactured. This traceability is generally provided by date or lot codes, by aerial number, batch mmiber or work order number. Ifdaacannotbetracedbackto the -ta, the diffialty in implementing corrective act~ons for out of control conditions is dtiplied. Rwventive aotion8 con h taken to prwent recurrence of the condition. but the material produced during the out of mntrol condition must be identified, reworked; sorted, to prevent defects fmnn reaching the cus-r.

repaired or scrapped 6-4-2 ~- ‘rhemoat Ueed feature of an is the display of control charts. The essential charts categories as follows: WC eoftware progmm fall into tuo baeic a. Charts used to represent variables data. b. Charts used to display attribute data. 6.4.2.1 ~ . The types of variables control charts supported must and should include the following: a. Average or~charts. b. R charts. c. sigma (~ charts. d. Moving R charts. 6.4.2.2 ~ . The types of attribute control charts provided should include the following: a. P charts. b. np charta. c. c chart. d. llChlX%a. The P andu charts should have provisions for dealing with equal and unequal lot Sizeel. 6-4-2-3 ~.

Whether variables or attribtee data is depicted, the control chart format should display centerlines and control limits along with the actual obeerved &ta. -es to the individual observations should & possible t- an on-line editing program. The control limits should be user electable to be defined by the observed data or set manually in the fozm of modified control limits based on the specification r-e for the parameter being studied. 75