3-7 Parameter List 3 Operation * 2nd control is displayed when SET (08) is allocated to one of from C001 to C005. 3-25 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Page Upper/Lower limit, Jump A061 Frequency upper limit 0.0/Frequency lower limit to Max. frequency 0.0 No Hz 4-19 A261 *2nd frequency upper limit 0.0/Frequency lower limit to 2nd Max. frequency 0.0 A062 Frequency lower limit 0.0/Starting frequency to Frequency upper limit 0.0 No Hz 4-19 A262 *2nd frequency lower limit 0.0/Starting frequency to 2nd frequency upper limit 0.0 A063 Jump frequency 1 Jump frequency: 0.0 to 400.0 Jump frequency width:
0.0 to 10.0 0.0 No Hz 4-19 A064 Jump frequency width 1 0.5 A065 Jump frequency 2 0.0 A066 Jump frequency width 2 0.5 A067 Jump frequency 3 0.0 A068 Jump frequency width 3 0.5 PID control A071 PID selection 00: Disabled 01: Enabled 00 No ⎯ 4-20 A072 PID P gain 0.2 to 5.0 1.0 Yes ⎯ 4-20 A073 PID I gain 0.0 to 150.0 1.0 Yes s 4-20 A074 PID D gain 0.00 to 100.0 0.0 Yes s 4-20 A075 PID scale 0.01 to 99.99 1.00 No Time 4-20 A076 PID feedback selection 00: FI 01: FV 02: RS485 communication 10: Operation function output 00 No ⎯ 4-20 A077 Reverse PID function 00: OFF (Deviation = Target value - Feedback value) 01:
ON (Deviation = Feedback value - Target value) 00 No ⎯ 4-20 A078 PID output limit function 0.00 to 100.0 0.0 No % 4-20 AVR A081 AVR selection 00: Always ON 01: Always OFF 02: OFF during deceleration 02 No ⎯ 4-23 A082 AVR voltage selection 200-V class: 200/215/220/230/240 400-V class: 380/400/415/440/460/480 200/ 400 No V 4-23