3-7 Parameter List 3 Operation * 2nd control is displayed when SET (08) is allocated to one of from C001 to C005. 3-34 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Page Communication function adjustment C070 Operator/ModBus selection 02: Digital Operator 03: ModBus 02 No ⎯ 4-79 C071 Communication speed selection (Baud rate selection) 04: 4800 bps 05: 9600 bps 06: 19200 bps 04 No ⎯ C072 Communication station No. selection 1. to 32. 1. No ⎯ C074 Communication parity selection 00: No parity 01: Even 02: Odd 00 No ⎯ 4-79 C075 Communication stop bit selection 1: 1-bit 2: 2-bit 1 No ⎯ C076 Communication error selection 00:
Trip 01: Trip after deceleration stop 02: Ignore 03: Free run 04: Deceleration stop 02 No ⎯ C077 Communication error timeout 0.00 to 99.99 0.00 No s C078 Communication wait time 0. to 1000. 0. No ms Various adjustment C081 FV adjustment 0.0 to 200.0 100.0 Yes % 4-74 C082 FI adjustment 0.0 to 200.0 100.0 Yes % 4-74