• Do not disconnect power abruptly when the test equipment is being formatted or in process of uploading or downloading. Or else it may result in program error. • Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as this could avoid damage to the sensors or the ECU. • Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle. • Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
• When reconnecting the ECU harness connector, be sure it is attached damaged. Packing List destinations, the accessories may vary. For details, please consult from the local dealer or check the packing list supplied with this tool together. • Main unit • Power adaptor • Main diagnostic cable • The fourth-generation of EEPROM data acquisition cable (without disman- tling dashboard) • BENCH mode cable • MCU converter V1 • MCU converter V2 • MCU cable with multiple leads • EEPROM chip adaptor • Benz infrared analog acquisition key • MCU cable with multiple leads • EEPROM converter • User Manual IV www.topdon.com