Chapter 5: Maintenance This chapter describes how to set the screen saver, set default values for initial speed and approach distance, enable smart locations and pendant messages, update the pendant's firm- ware, troubleshoot problems, and maintain the pendant. 5.1 The System Maintenance Screen The System Maintenance screen is used to set various pendant options, obtain information on the system, and view the error log. Figure 5-1. System Maintenance Screen The following table describes the options shown on the System Maintenance screen. T20 Pendant User's Guide, 10433-000 Rev.
E Page 39 of 50 Option Description Screen Saver Sets the screen-idle time (Thirty Seconds, One Minute, Two Minutes, Five Minutes, Ten Minutes, Twenty Minutes, One Hour) before the screen saver is activated. For details, see Set- ting the Screen Saver on page 40. Initial Speed Sets the default speed used when the system starts up (Slow, Normal). For details, see Setting the Initial Speed on page 41. Smart Locations Enables/disables the Smart Locations feature, which organ- izes the locations by type. For details, see Enabling Smart Locations on page 41. Approach Dist Sets the approach distance (1 mm to 200 mm). For details, see Setting the Approach Distance on page 41.