Chapter 5: Maintenance The following table describes the soft keys shown on the System Maintenance screen. 5.2 Setting the Screen Saver You can specify the length of time without activity before the screen saver is activated. To set the screen saver idle time: 1. From the Home 1 screen, press Next > to display the Home 2 screen. 2. Press Maint. The System Maintenance screen opens. 3. If necessary, press the up/down arrow buttons to select the Screen Saver field. Press OK. 4. Press the up/down arrow buttons to select the length of time before the screen saver is activated. The options available are:
l Thirty Seconds l One Minutes l Two Minutes l Five Minutes l Ten Minutes l Twenty Minutes l One Hour 5. Press OK to accept the change. Press Cancel to revert to the previous setting. T20 Pendant User's Guide, 10433-000 Rev. E Page 40 of 50 Option Description Pendant Msgs Enables/disables whether errors are displayed. If disabled, errors are not reported to the pendant. Soft Key Description Info Accesses a screen that displays the system information from the controller. For details, see Displaying System Information on page 42. Errors Accesses the error log. For details, see Displaying Recent Errors on page 43. Update Updates the pendant firmware.
For details, see Displaying System Information on page 42.