Measure EN 10.2.3 Delay and phase parameters Data sources A and B, i.e., data sources A and B in the measurement settings menu, can be any channel in CH1- CH4. 1. FRR[First Delay Rise-Rise] ： ↑A->↑B, indicates the time difference between the first rising edge of data source A and B. 2. FFF[First Delay Fall-Fall] ： ↓A->↓B, indicates the time difference between the first falling edge of data source A and B. 3. FRF[First Delay Rise Fall] : ↑ A-> ↓ B, the time difference between the first rising edge 4. FFR[First Delay Fall Rise] : ↓ A-> ↑ B, the time difference between the first falling of data source A and the first falling edge of data source B.
edge of data source A and the first rising edge of data source B. 5. LRR[Last Delay Rise-Rise] ： ↑A->↑B, indicates the time between the first rising edge 6. LRF[Last Delay Rise Fall] : ↑ A-> ↓ B, indicates the time between the first rising edge of data source A and the last rising edge of data source B. of data source A and the last falling edge of data source B. 7. LFR[Last Delay Fall Rise] : ↓ A-> ↑ B, indicates the time between the first falling edge of data source A and the last rising edge of data source B. 8. LFF[Last Delay fall-fall] : ↓ A-> ↓ B, indicates the time between the first falling edge of data source A and the last falling edge of data source B. 9.
Positive phase difference [R-PhaseAB]: the phase difference between the rising edges of the channels. 10. Negative phase difference [F-PhaseAB] : the phase difference between the falling edges of the channels. [Phase Rise Time]: ↑ A->B, the phase difference is calculated according to the period of "delay 1->2" and data source 1, expressed in degrees. The phase calculation formula is: Phase indicates phase ↑ A->B or phase ↓ A->B. Delay indicates delay FRR or delay FFF. Period1 refers to the period of the digital data source 1. Tablet1000 User manua l Copyright © Qingdao Hantek Electronics Co., LTD 48