Measure EN 10.2.4 Voltage parameters 1. [Vmax] : voltage from the highest point of the waveform to GND. 2. [Vmin] : voltage from the lowest point of the waveform to GND. 3. [PK-PK] : voltage from the highest point to the lowest point of the waveform. Double peak = Vmax - Vmin 4. [Vtop] : the voltage from the waveform flat top to GND. 5. [Vbase] : the voltage from the waveform bottom to GND. 6. [Vampl] : the voltage value from top to bottom of the waveform. Amplitude = Vtop - Vbase 7. [Vmid] : the actual voltage corresponding to the middle value of the threshold. 8. [Average]: the arithmetic average over the entire waveform or gating region. 9. [Per-average]:
the arithmetic average of the first period of a waveform. Where xi is the measurement result of the ith point, and n is the number of points measured. 10. [Vrms] : root mean square value over the entire waveform or gated region. 11. [Per-Vrms] : the root mean square value within a period. Where xi is the measurement result of the ith point, and n is the number of points measured. 12. [Rise Overshoot]: The ratio of the difference between the maximum value and the 13. [Fall Pre-shoot]: The ratio of the difference between the minimum and the bottom top value of a waveform to its amplitude. value of the falling edge of a waveform to its amplitude. 14. [Fall Overshoot]:
The ratio of the difference between the maximum value and the top value of the falling edge of a waveform to its amplitude. 15. [Rise Pre-shoot]: The ratio of the difference between the minimum value and the bottom value of the waveform to the amplitude. 16. [Variance]: The average sum of the squares of the difference between the amplitude of each waveform point over the entire waveform or gating region and the mean Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual 49