When the fault has been eliminated, the Alarm display goes out shortly afterwards. When the alarm button 5 is pressed, the temperature display stops flashing. Fig. 2 /3 The temperature display indicates for 5 seconds the warmest temperature which was reached in the freezer compartment. If the alarm button 2 /5 flashes and 5 acoustic signals sound, there is a fault. Inform customer service. Ending the appliance self-test When the programme has ended, the appliance switches over to normal operation. To switch off the warning signal, press the Alarm button 5. Ventilation openings have been covered. Ensure that there is adequate ventilation. Do not exceed max. freezing capacity.
Appliance is open. Close the appliance. Fault Possible cause Remedial action Too much food was placed in the freezer compartment at once. A fault caused the freezer compartment to become too warm in the past. Your appliance features an automatic self-test program which shows you sources of faults which may be repaired by customer service only. 1. Switch off the appliance and wait 5 minutes. 2. Switch on the appliance and within the first 10 seconds hold down a super button, Fig. 2 /8 or 10, for 5-10 seconds until the second warning signal sounds. When the self-test ends and a warning signal sounds twice, your appliance is in working order.
Starting the appliance self-test Appliance self-test The self-test programme starts. Freezer compartment temperature display flashes. Fig. 2 /3 Warning signal sounds The Alarm button is lit. Fig. 2 /5 Freezer compartment temperature display flashes. Fig. 2 /3 The freezer compartment is too warm! The frozen food is at risk of thawing! en 20