= STEAM ZONE SILK SYNTHETIC DRY DRY Polyester,Acetate,Acrylic, Nylon - When steam or dry ironing, press several times on the Spray Button to moisten the linen (H) and to remove stubborn creases. - Make sure that there is water in the tank before using this button. Moistening the linen (Spray) Recommendations: Fabrics and ironing temperatures: Your iron heats up quickly: begin by ironing those fabrics that are ironed at low temperatures, then go on to those requiring a higher temperature; If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again.
When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate of the fibres. H - Press the Shot of steam button from time to time (I). - Wait a few seconds between each shot before pressing the button again. Obtaining more steam for removing wrinkles (depending on the model) - Hang up the garment on a hanger and hold the fabric slightly taut with one hand. - Set the thermostat control on MAX (J). - Press the Shot of steam button ( )repeatedly (K), moving the iron from top to bottom (L). - Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics.
Vertical steam ironing (depending on the model) I J K L 3 FABRIC POSITION OF THERMOSTAT CURSOR STEAM SETTING POSITION LINEN COTTON WOOL MAX ●●● ●● MAX MIN