Unpacking and Inspecting the Unit Auto Start Hard Stop / Disable Connector DANGER Hazardous Voltage! Take care that this connector does not disconnect the AC voltage input. If service of the electrical box is required, you MUST unplug the AC Shore Power before proceeding. This connector has the following two main functionalities: 1. Hard Stop - this connector is wired directly to the power relays. When you disconnect (unplug this connector), the relays and the circuit opens immediately stopping the unit. 2. Disable Autostart - during unit commissioning or while any maintenance is being carried out on the unit, and a power off Is needed, is recommended to unplug this connector.
In this case, the power relays remain open and the machine cannot start. 10 TK 56881-18-IM-EN