Media Loading Settings Sets paper feed movement to the print starting position when turning the printer power on or the roll paper cover is closed. The following is the movements to feed the paper to the print starting position when turning the printer power on or the roll paper cover is closed. (Default setting is [Media Loading Method (with Cutting)] . The user does not need to set when using with default setting.) 1 Turn the printer on. 2 Display the printer driver window. (See How to Use the Printer Driver on page 154 for how to display the driver window.) 3 Select [Maintenance And Utilities] tab, and click [Media Loading Settings].
112 Setting Specification Power ON Roll paper cover close Media Loading Method (with Cutting) When either black mark detection or detection of gaps between labels is set for media position detection, the top of black mar k or the top of label is detected by the black mark detector or th e label detector at the power-on, and the paper is fed to the print starting position. When no position is detected, the specified amount of paper is fed. After paper feeding, the printer enters the stand-by mod e with performing autocutting.
√ √ Media Loading Method (without Cutting) When either black mark detection or detection of gaps between labels is set for media position detection, the top of black mar k or the top of label is detected by the black mark detector or th e label detector at the power-on, and the paper is fed to the print starting position. When no position is detected, the specified amount of paper is fed. After paper feeding, the printer enters the stand-by mod e without performing autocutting. √ √ No Media Load- ing Method The printer does not feed the paper to the print starting position at power-on. √ —