Chapter 2 Setup Setting EPSON Status Monitor 3 When EPSON Status Monitor 3 is used, the paper type and the ink level are displayed on a pop-up window when printing. In addition, when a fatal error occurs, an error window is displayed. [Not use] is set by default setting; however, if a fatal error occurs, an error window can be displayed. Use/Not use EPSON Status Monitor 3 [Not use EPSON Status Monitor 3] is set by default setting. [Notification Settings for Fatal Errors] is displayed on the EPSON Status Monitor 3 Settings window in Driver Utilities. 2 Follow the steps below to change to [Use EPSON Status Monitor 3]. 1 Turn the printer on. 2 Display the printer driver window.
(See How to Use the Printer Driver on page 154 for how to display the driver window.) 3 Select [Driver Utilities] tab and click [Driver Preferences]. 119