Chapter 2 Setup For Ethernet Model and shared printer If using a system that prints from multiple computers or applications, it is possible that paper could suddenly start to feed in reverse when peeling labels by hand, resulting in a paper jam. For this reason, set to [Auto Cut] or use the [CUT button] to cut the paper.
2 127 Paper type to use Printer Diver Settings Paper cutting method Auto Cut No Auto Cut Stop at the Print End Position Feed To Cut Posi- tion Feed To Peel Off Position Roll Media Receipt √ — — — Cuts automatically — √ √ — Cuts the backing paper by pressing [CUT button] Full-page Label √ — — — Cuts automatically — √ √ — Cuts the backing paper by pressing [CUT button] Die-cut Label √ — — — Cuts automatically — — — √ Peels the label by user Backing paper is not cut * — √ √ — Tears along perforated lin e manually * Black Mark Receipt √ — — — Cuts automatically — √ √ — Cuts the backing paper by pressing [CUT button] Black Mark Die-cut Label √ — — — Cuts automatically — — — √ Peels the label by user Backing paper is not cut * — √ √ — Tears along perforated lin e manually * Black Mark Receipt (Wrist Band) √ — — — Cuts automatically — √ √ — Cuts the backing paper by pressing [CUT button]