EpsonNet SDK EpsonNet SDK is the API for the Epson network printer, and also supported by this Product. The network setting is checked but setting can not be executed on this product. This is to use for developing the application to monitor the printer on the network of this product. The EpsonNet SDK operates under Win32. It can operate also under .NET, but not is not supported officially. Environmental Setting for EpsonNet SDK To make environmental settings for the EpsonNet SDK, “setting.ini” of the EpsonNet SDK needs to be edited before installing it. See below for instructions on editing it. To send the printer status with the EpsonNet SDK, it is necessary to set the Trap function.
Setting Procedure When the EpsonNet SDK has already been installed, uninstall it first. Follow the steps below to make the setting for the EpsonNet SDK, and then install it again. 1 Edit “setting.ini” in the Install Disk of the EpsonNet SDK. 2 Install the EpsonNet SDK. 132 Item Set contents Value Default TCPIP Set to use the EpsonNet SDK for Ethernet model. Apply : 1 Not apply : 0 1 LOCAL Set to use the EpsonNet SDK for USB model. Apply : 1 Not apply : 0 1 SHARE Set to use the EpsonNet SDK on shared printers. Apply : 1 Not apply : 0 0 TRAP Set to use the SNMP TRAP. Apply : 1 Not apply :
0 0 EXECTYPE Fixed value TERM - SHREAGT Set to use the server communication module for MS shared print- ing. Apply : 1 Not apply : 0 0 EPSONNETSDK Fixed value 0 - INSTALL Fixed value 0 -