Chapter 4 Handling • Module: Sets the thin element width in dots. 4 -: Not supported *1: The values for the Rotation Settings in the table are those when [ Orientation ] in [ Page Layout ] tab is se to “ Portrait .” When it is set to “ Landscape ,” the description is changed as below. "Normal, Rotate 180 Degrees": “Rotate 90 Degrees, Rotate 270 Degrees" "Rotate 90 Degrees, Rotate 270 Degrees": "Normal, Rotate 180 Degrees" * 2: By the combination of the specific paper type and the Symbol, the following conditions are available.
Wrist Band & Code128 :Element = 5 dots (D-grade) Wrist Band & Codabar :Element = 5 dots, Element ratio = 2.5 (C-grade) When “Module” is set to an odd number and the resolution is changed by changing [Category] or [Print Quality], the printed barcode size may be changed. The barcode size can be checked by [Size Display] button. 161 Symbol Category Print Quality Rotation Settings *1 Adjust Bar Width Upper Line: Minimum Module [by 360 dpi] Lower Line:
Minimum Element Ratio ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher UPC-A UPC-E JAN13(EAN) Plain Media, Plain Media Label Speed Normal, Rotate 180° Available 4 dot 2.5 - - JAN8(EAN) Code39 ITF Rotate 90°, Rotate 270° 6 dot 2.5 - - Codabar Code93 Code128 Quality Normal, Rotate 180° 4 dot 2.5 - - GS1-128M GS1-128 Rotate 90°, Rotate 270° 6 dot 2.5 - - GS1 DataBar Omnidirectional Fine Media, Fine Media Label, Synthetic Media Label, PET Film, Wrist Band Speed Normal, Rotate 180° 3 dot 2.5 4 dot 2.5 GS1 DataBar Truncated Rotate 90°, Rotate 270° 6 dot 2.5 *2 - *2 - GS1 DataBar ExpandedM Quality Normal, Rotate 180° 3 dot 2.5 4 dot 2.5 GS1 DataBar Expanded GS1 DataBar Lim- ited Rotate 90°, Rotate 270° 6 dot 2.5 *2 - *2 -