INK (ink) LED: Red • Flashes when the ink is low or waste ink in the ink cartridge is nearly full. • Lights when it is time to replace the ink cartridge, when the ink cartridge is not installed or is not correctly installed, and when waste ink in the ink cartridge is full. • Lights off when ink in the ink cartridge is adequate. PAPER (paper out) LED: Red • Lights when the paper is not installed or is not correctly installed. • Lights off when the paper is correctly installed. • The INK LED does not flash even if the ink is low when the “LED Notification Setting at Ink Low” is set not to appear on [Notification Settings] on [Maintenance And Utilities] tab of the printer driver.
• The printer status is also displayed with combination of lighting and flashing of LED’s. See "Status/Error Indications" on page 19 for details. Connectors All cables are connected to the connector on the lower rear of the printer. • Power connector: Connects cable of the AC adapter. Connected when shipped from the factory. • USB Connector: Connects the printer with the host computer. • Ethernet Connector: Connects the printer with the network. • Inlet (AC Adapter): Connects the AC cable. Paper ejection tray Installing the paper ejection tray enables you to accumulate printed paper temporarily in it.
• For how to attach the paper ejection tray, see "Attaching/Adjusting the Paper Ejection Tray" on page 100 . • For maximum capacity for ejected paper of the paper ejection tray, see "Paper Ejection Tray" on page 54 . Paper may fall from the paper ejection tray due to a curl or the length of the paper. 18