[Page Layout] tab Favorite Selects one of the registered print settings from the list. This is the default setting when printing. Changes to setting when installing the printer driver if [Initial setting] is selected. Orientation Changes settings of the printing direction (Portrait, Landscape, Rotate 180, Horizontal Flip). Copies Sets the number of prints. Layout Adjusts the printing position. This is the adjustment for each printing job and different from [Print Start Position Adjustment] on [Maintenance And Utilities] tab. According to the paper specification (such as the color of black mark is light, etc.), this adjustment should be performed.
Platen Vacuum Manual Adjustment When this is checked, [ Change Vacuum Setting ] becomes active. Clicking [ Change Vacuum Setting ] displays the [ Platen Vacuum Manual Adjustment ] screen to adjust the platen vacuum power. When it is unchecked, the default value of the vacuum power is set. In this case, it is not necessary for the user to make this adjustment since this is adjusted in the factory before shipping. Watermark By turning on this check box, the text or the graphics such as “Important” as a watermark is printed. The button is grayed out when [Save Roll] on [Main] tab is not set to “No Saving”.
Since the watermark is printed in front of the printed data, a barcode cannot be read when the bar- code and the watermark overlap each other. 182