/ : Lights / : Flashes : Off — : No change 20 LED Status Remedy Power Error Ink Paper — Paper size error Set specified papers. (See "Loading/Replacing the Paper" on page 80.) When the specified paper is not available, cancel the print job from the spooler. If no print job is in the spooler, turn off and on the printer to recover from the error. Paper path error Set DIP switch 3 setting to paper feeding method in the printer driver. (See "Setting the DIP Switches" on page 78) Paper jam error Remove the jammed paper. (See "Removing Jammed Paper" on page 151.) — Paper type error Set specified papers.
(See "Loading/Replacing the Paper" on page 80.) — — Ink cartridge is expended Waste ink cartridge is full Replace the ink cartridge with a new one. (See "Replacing the Ink Cartridge" on page 145.) Ink cartridge is not loaded Ink cartridge is not loaded correctly Load the ink cartridge correctly. (See "Replacing the Ink Cartridge" on page 145.) Ink cartridge cover is open Close the ink cartridge cover. — — Ink cartridge is running low Waste ink cartridge is nearly full The time to replace the ink cartridge is close. Prepare a new ink cartridge. — — Paper empty Paper out error Set the papers. (See "Replacing the Paper" on page 147.) Roll paper cover is open Close the roll paper cover.
— — Paper removal error Remove the fanfold paper remaining. (See "For Fanfold Paper" on page 152)