Chapter 1 Product Overview 1 • Do not use the paper with a hole or cutout. • When using fanfold paper, the black marks must be at least 0.5 mm from the perforated lines. • Make sure to keep the same position of the black marks to the perforated lines (position that can be detected by black mark sensor) when inserting the paper from either side in order to use the paper inserting from reverse direction.
35 Paper type Plain Media, Fine Media, PET Film Form Fanfold paper Paper width 50 to 108 mm {0.2 to 4.25"} Black mark width 13 mm {0.51"} or more Black mark length 5 mm {0.19"} or more Black mark centering position 8.5 ± 1 mm {0.33 ± 0.039"} Black mark interval 15 to 304.8 mm {0.59 to 12.0"} Paper thickness 0.119 to 0.151 mm {0.0047 to 0.0059"} Pitch of perforated line: 203.2 to 304.8 mm {8.0 to 12.0"} Form of perforated line Plain media : 1 mm {0.039"} uncut, 5 mm {0.19"} cut Fine media : 1 mm {0.039"} uncut, 5 mm {0.19"} cut PET film : 0.6 mm {0.024"} uncut, 8.4 mm {0.33"} cut Number of folds 500 or less