Chapter 1 Product Overview Die-cut Label When removing all the fringes When removing right and left fringes only (Black Mark Die-cut Label) labels Edge R Edge R 1 labels Backing paper Label area Label chaff Edge cutoff width Edge cutoff width Edge cutoff Edge cutoff Edge cutoff (edge) Edge cutoff (edge) Do not use the paper with a hole or cutout.
37 Gap between R ff length Label between Gap E Label Label width Paper type Plain Media Label Form Roll paper Backing paper width 30 to 112 mm {1.18 to 4.41"} Label width 25.4 to 108 mm {1.0 to 4.25"} Label length When removing all the fringes 25.4 to 1117.6 mm {1.0 to 44.0"} When removing right and left fringes only 15 to 1117.6 mm {0.59 to 44.0"} Gap between labels 3 to 6 mm {0.12 to 0.24"} Edge cutoff on left/right side 2 ± 0.5 mm {0.079 ± 0.02"} Edge cutoff width 1.5 mm {0.059"} or more Label edge R 2 mm {0.079"} or less Paper thickness 0.128 mm {0.005"} Roll paper core Outside diameter:
44.1 mm {1.74"} External diameter Maximum 101.6 mm {4.0"} Winding direction Printing face must be facing outside.