Connecting the Power Supply Unit (PS-180) Use the specified AC adapter PS-180 as the power source. • Be sure to use the specified AC adapter only. Using a nonstandard power supply can result in electric shock or fire. • Should a fault ever occur in the AC adapter, immediately turn off the power to the printer and remove the power supply cable from the wall socket. WARNING Use the AC cable that meets safety standards of each country. 1 Make sure the printer is off. 2 Insert the connector of the AC cable into the inlet of the AC adapter. 3 Insert the power plug of the AC cable into the wall socket.
• Be sure to remove the AC cable from the wall socket whenever connecting or discon- necting the AC cable to the printer. Failure to do so may result in damage to the AC adapter or the printer. • Make sure the wall socket power supply satisfies the rated voltage requirements of the AC adapter. Never insert the AC cable into a socket that does not meet the rated voltage requirements of the AC adapter. Doing so may result in damage to both the AC adapter and the printer. CAUTION 66 Connecting the AC Cable