Chapter 3 Handling ❏ The following table shows the recommended value for the 2D symbol module. • Recommended value for setting the barcode/2D symbol font (2D symbol of stack type) (PDF417, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Expanded Stacked) 3 - : Not supported. * 1 : Whether paper feed is performed during printing 2D symbol can be checked in [ Display Media Feed Position ] - [ Display Print Preview ] in the Print Preview function. For this function, see "Print Preview" on page 109 . *2: Specify when using PDF417.
103 Category Graphic resolu- tions (Horizontal x vertical) (dpi) Print Status (*1) Adjust Bar Width (*2) Minimum Module [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Plain, Plain label 360 x 360 No Paper feed 3 6 dot - - With Paper feed 6 dot - - Synthetic label Matte Matte label Glossy label Wristband 360 x 360 No Paper feed 4 dot - - With Paper feed 4 dot - (*2) - 720 x 360 No Paper feed 4 dot - - With Paper feed 4 dot - (*2) -