• Recommended value for setting the barcode/2D symbol font (2D symbol of matrix type) (AztecCode, QRCode) - : Not supported. * 1 : Whether paper feed is performed during printing 2D symbol can be checked in [ Display Media Feed Position ] - [ Display Print Preview ] in the Print Preview function. For this function, see "Print Preview" on page 109 . *2: Only QRCode is confirmed. 3 Click [ Add ]. The selected 2D symbol font is saved and the font name is added to the font list. • The 2D symbol font can be registered up to 30. • The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font name from the font list and changing the setting.
• The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font name from the font list. • Test print is executed according to the setting by clicking [Print] after inputting the text in the box. 104 Category Graphic resolu- tions (Horizontal x vertical) (dpi) Print Status (*1) Minimum Cell Size [by 360 dpi] ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Plain, Plain label 360 x 360 No Paper feed 6 dot - - With Paper feed 8 dot - - Synthetic label Matte Matte label Glossy label Wristband 360 x 360 No Paper feed 5 dot 6 dot (*2) With Paper feed 6 dot 7 dot - 720 x 360 No Paper feed 5 dot 6 dot (*2) With Paper feed 6 dot 7 dot -