Paper feed for positioning (Without cutting) 118 Settings Description Paper feed for positioning (With cutting) Paper loading settings: Die-cut label (Blackmark), Continuous paper (Blackmark), Die-cut label (Gap)/Transparent die-cut label Paper is loaded based on the upper end of black mark/label detected by the black mark detecto r or label detector. After paper feed is finished, autocut is performed and the printer enters th e standby status. Paper loading settings: Full-page label/Continuous paper/Transparent full-page label A certain amount of paper is fed. After paper feed is finished, autocut is performed and th e printer enters the standby status.
Paper feed for positioning (Without cutting) Paper loading settings: Die-cut label (Blackmark), Continuous paper (Blackmark), Die-cut label (Gap)/Transparent die-cut label Paper is loaded based on the upper end of black mark/label detected by the black mark detecto r or label detector. After paper feed is finished, no autocut is performed and the printer enters th e standby status. Paper loading settings: Full-page label/Continuous paper/Transparent full-page label A certain amount of paper is fed. After paper feed is finished, no autocut is performed and th e printer enters the standby status.