Rotation Settings: Select a setting when printing the barcode rotated by the specified rate. Hexadecimal Entry Mode: Turn on the check box when the data for barcode is specified on Hexadecimal Entry Mode. Composite: Turn on the check box to print barcode with a composite symbol. Separate the data specified to a composite symbol and a barcode with “\ |” or “| \”. Describe the data in the order of the composite symbol and the barcode. Example: 1234567890\ |012345678905 Use a Quiet Zone: Leaves a blank margin on the right and left side of barcodes for bet- ter readability. The barcode printing position is moved based on the amount of the margin. Module: Sets the thin element width in dots. - :
Not supported * : Bars of the printed barcode may be thickened since ink soaks into the paper. It is recommended to check [ Adjust Bar Width ]. 74 Category Graphic resolution (dpi) Rotation Settings Adjust Bar Width* Upper Line: Minimum Module [by 360 dpi] Lower Line: Minimum Element Ratio ANSI Grade D or higher ANSI Grade C or higher ANSI Grade B or higher Plain Media 360x180 Normal, Rotate180 Available 4 dot 2.5 - - Rotate90, Rotate270 6 dot 2.5 - - 360x360 Normal, Rotate180 4 dot 2.5 - - Rotate90, Rotate270 6 dot 2.5 - -