Chapter 4 Handling When “Module” is set to an odd number and the resolution is changed by changing [Print Resolution], the printed barcode size may be changed. The barcode size can be checked by using the [Size Display] button. Bar Height: Sets the element height with dots. Specified dots indicate the actual print size. Adjust Bar Width: Narrows the element width when printing. Make sure to select it only when the barcode is not clear enough to be read. HRI Character Position: Select the position of the HRI characters. Select [ Do Not Print ] when not desired. The printing position is limited for some types. HRI Font: Select the HRI character font size. Element Ratio:
Sets the thick element width by the ratio to the thin element width. Character Spacing: Sets the character spacing (interval) by the ratio to the thin element width. 2 Click [ Add ]. The selected barcode font is saved and the font name is added to the font list. Up to 30 barcode fonts can be registered. The barcode font setting can be overwritten by clicking [ Save ] after selecting the font name from the font list and changing the setting. The barcode font setting can be deleted by clicking [ Delete ] after selecting the font name from the font list. Execute a test print according to the setting by clicking [ Print ] after inputting the text in the box.
4 Specifying the barcode data About the composite symbol: Specify the barcode data by referring to the following descriptions. The composite component type is selected automatically depending on the digit number of the data. About the HRI character: 75 Composite Component Type Encodable Digit Number CC-A 1 ~ 56 digits CC-B 1 ~ 338 digits