Chapter 1 Product Overview Printing • For the USB interface model, it takes time for the next printing if you turn the printer off and on after printing. • The ink cartridge contains 4 colors of ink. Even when one particular color is specified, all 4 col- ors of ink are used for printing and for keeping the print head in good condition. When the ink level of even one color reaches the lowest limit, the printer stops printing. • The colors of printouts may become abnormal if you tilt this printer or subject the printer to any shocks. When you move this printer after ink charging, check the colors by performing a test print. If the colors of printouts are not normal, perform head cleaning.
See "Head Cleaning" on page 96 for how to perform head cleaning. • When printing image data, white lines (lines shown in white) or black lines (overlapping of image parts) may appear at about 1 inch intervals in the print result. By setting [Print Head Alignment] - [Media Feed Adjustment] in [Maintenance And Utilities] tab, this can be reduced but cannot be removed completely. 1 • When printing image data, change of color tone may appear at 1 inch intervals in the print result. 33