Setup This chapter describes setup and installation of the product. Flow of Setup This chapter consists of the following sections along with the setup flow of the product. Follow the flow of setup in order to prevent ink leakage. 1. Installing the Printer (page 35) 2. Connecting the USB/Ethernet Cable (page 37) 3. Connecting the AC Adapter (page 39) 4. Loading the Roll Paper (page 40) 5. Loading the Ink Cartridge (page 42) 6. Setting the Lane ID (page 44) 7. Setting the Printer IP Address (page 45) This step is not necessary for the USB interface model. 8. Adding a TCP/IP Port (page 46) This step is not necessary for the USB interface model. 9. Installing the Printer Driver (page 49) 10.
Installing Status API (page 51) This step is not necessary if you do not use Status API. 11. Setting the DIP Switches (page 52) This step is not necessary if you do not need to change the settings. 34