Chapter 2 Extended I/F Specification Paper back feed [Input-Output] [Format] ^S(CNA, R, b [Parameter] [Function] “Paper back feed” signal is set to the mode that is specified by parameter b. 2 [Initial value] 0 [EX] "Paper back feed" signal is set to the mode that is high in normal status, low in back feeding. ^XA ^S(CNA,R,1 ^JUS ^XZ The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Use a USB cable or Ethernet cable to send ESC/Label commands from the host PC. For the signal output timing, see "Timing chart" on page 20 . 9 Description Definition range b = mode D/E/0/1/2 Parameter b Mode description D/0 “Paper back feed” signal is not output.
1 “Paper back feed” signal is high in normal status and low in back feeding. E/2 “Paper back feed” signal is low in normal status and high in back feeding.