• When handling roll paper like setting it to the rewinder, do so after pausing printer operations tem- porarily by pushing the Pause button. • When separating perforations of fanfold paper, do so after pausing printer operations temporarily by pushing the Pause button or cutting the fanfold paper with the Cut button. 20 Name Description (Power) Button Turns on/off the printer. When the Dip switch 1 is ON, this product can be reset. See "Setting the Dip Switches" on page 184 Selection/Setting Button Use this button to select/set the menus and items displayed on the LCD. (Menu) Button: Displays the menu screen. Button: Displays the previous menu. / Button:
Use this button to select menus and items. OK Button: Executes the selected menu and item. Cut Button Cuts the paper. Feed Button Press this button for less than three seconds to feed one page of paper. Press this button for three seconds or more to feed the paper continuously. Back Feed Button Press this button only when replacing paper. After cutting the printed paper using the Cut button, hold down the Back Feed but- ton to feed the paper backward so that you can pull out the paper. However, to prevent paper jams, after you perform a back feed once, you cannot exe- cute a back feed until the paper is set again.