TM-C7500 Series/C7500G Series Technical Reference Guide (EN)

Series Series / Technical Reference Guide Describes features for the product. Describes setup and installation of the product and peripherals. Describes how to handle the product. Describes how to control the printer and necessary information when you develop applications. Describes general specifications and character code tables. M00079113 Rev. N Product Overview Setup Handling Application Development Information Appendix

Стр. 1

Cautions • No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permis- sion of Seiko Epson Corporation. • The contents of this document are subject to change without notice. Please contact us for the latest informa- tion. • While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. • Neither is any liability assumed for damages resulting from the use of the information contained herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by Seiko Epson Corporation. Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision and ESC/Label are registered trademarks or trademarks of Seiko Epson Corporation. Microsoft®, Windows®, Windows Vista®, and Windows Server® are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Zebra Technologies Corporation and ZPL II are the registered trademarks or trademarks of Zebra Technologies Corporation. Intel®, Celeron®, and Pentium® are trademarks of Intel Corporation in the U.S. and/or other countries. AMD® and AMD Athlon™ are a trademark or registered trademark of Advanced Micro Devices, Inc. BarTender® is registered trademark of Seagull Scientific, Inc. in the United States and other countries. Seagull Scientific is trademark of Seagull Scientific, Inc. in the United States and other countries. NiceLabel® is trademarks or registered trademarks of Euro Plus d.o.o. CODESOFT is registered trademarks or trademarks of TEKLYNX International.

All other trademarks are the property of their respective owners and used for identification purpose only. ©Seiko Epson Corporation 2014-2022. 2

Стр. 2

Cautions on Installation

For Safety This document explains the functions of and how to operate this product and the software, the setup from installation until printing, information regarding maintenance, and solutions to various kinds of trouble. Be sure to read this document thoroughly before use and to use this product properly. You can easily setup this product using Install Navi. Key to Symbols 3 The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. Handling the product improperly by ignoring this symbol can lead to death or serious injury.

WARNING Handling the product improperly by ignoring this symbol can lead to injury and property dam- age. CAUTION Indicates supplementary notes and other useful information. Cautions on Installation • Do not block the air vents of this product. Doing so can result in heat accumulated in the product causing a fire. ("Rear Side" on page 21) • Do not cover the product with a cloth or install it in a poorly-ventilated location. Make WARNING sure to allow installation space as specified in this manual. ("Location Appropriate for Installation" on page 38) • Do not install/store the product in an unstable location or in a location subject to vibration from other devices.

Equipment may fall or collapse, causing breakage and possible injury. • Do not install the product in a location exposed to oily smoke or dust, or in a humid location. CAUTION Doing so may cause electric shock or fire. • Use a natural posture when lifting this product. Lifting the product in an inappropriate pos- ture may cause injury. • Do not carry this product alone. Two or more people are required while unpacking or moving the product. The weight of this product is approximately 37 kg {81.57 lb}. ("Installing the Printer" on page 37) • Hold the parts of the product specified in this manual when lifting up this product.

Otherwise, the product may fall or your finger may be caught when you lower the product, resulting in injury. ("Installing the Printer" on page 37) • While installing the printer, make sure that no cords or foreign objects are tucked under the printer.

Стр. 3

Cautions on Power Supply

Cautions on Power Supply • Do not allow dust or foreign materials to adhere to the power plug. Accumulated dust or foreign material may cause electric shock or fire. • Insert the power plug securely into the socket. Failure to insert the plug securely may cause electric shock or fire. • Use only the power cable supplied with this product. In addition, use the supplied power cable only for this product. Other use may cause electric shock or fire. • Do not use a damaged power cable. Doing so may cause electric shock or fire. Contact qualified service personnel if the power cable is damaged. Observe the follow- ing points so as not to damage the power cable: ∗ Do not modify the power cable.

∗ Do not place heavy objects on the power cable. ∗ Do not forcibly bend, twist or pull the power cable. ∗ Do not locate the power plug near a heating device. • Do not hold the power plug with a wet hand. Doing so may cause electric shock. • Do not connect too many power cables to one outlet. Doing so may cause fire. • Disconnect the power plug from the outlet on a periodical basis, and clean the areas around and between the blades. Leaving the power plug connected to the outlet for a long period of time may cause dust to accumulate on the blade root, resulting in a short- circuit or fire. • Hold the plug and do not pull the cable when disconnecting the power plug from the outlet.

Pulling the cable may damage the cable or deform the plug, causing electric shock or fire. WARNING To ensure safety, unplug this product before leaving it unused for an extended period. CAUTION 4

Стр. 4